Sony Xperia 2 Power Button Repair
Complete guide to Sony Xperia 2 power button repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Power Button Repair is one of the most common repairs for Sony Xperia 2. This repair involves replacing the damaged input component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement input part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Weaken the glue that is keeping the screen in place by heating up the edges of the phone with a hair dryer or heat gun.
The phone gets very hot and can hurt the user handling it.
Step 2:
Scrape all the glue from the inside edges by inserting opening picks into the bottom edge of the phone and working your way around the edges.
If the glue hardens and becomes difficult to move the plastic around the edges, reheat the phone.
Step 3:
Pry open the phone by inserting an opening pick under one of the edges and removing the screen.
The screen is still attached by a connector, so do not pull the pieces apart.
Step 4:
Remove the bracket covering the connector by grabbing one side of the bracket with [product|IF145-020-5|angled tweezers] and gently pulling it off.
Step 5:
Gently remove the connector by using a spudger to pop it off.
Step 6:
Take out the twelve 3.5mm screws using the Phillips #00 screwdriver.
Remove the one 3 mm Phillips #00 screws.
Remove the two 1mm Phillips #00 screws.
Fifteen screws should be removed in total in this step. (Not all the screws are visible in the picture.)
Step 7:
Lift the metal screen shield out of the phone.
Step 8:
Use the spudger to pry up the battery flex connector to pop the battery out.
Step 9:
Lift the battery out of the phone.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $30-$84)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($50-$140)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Sony Xperia 2 instead of replacing it, you're preventing approximately 61 kg of CO₂ emissions. Manufacturing a new Sony Xperia 2 generates 64 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 95% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Sony Xperia 2 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.