Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Display
moderate

Samsung Galaxy Watch 5 Screen Replacement

Complete guide to Samsung Galaxy Watch 5 screen replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$80 - $350
⏱️ Time:1-2 hours
🌍 CO₂ Saved:28 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$48 - $210
Labor$32 - $140
Total Estimated Cost$80 - $350

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Screen Replacement is one of the most common repairs for Samsung Galaxy Watch 5. This repair involves replacing the damaged display component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

🔧 Required Tools

What You'll Need

  • Replacement display part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1: Remove the watch band

Step 1 - Image 1

Take your watch off the charger and power it down.

Remove the watch band.

Step 2: Unfasten the back cover

Step 2 - Image 1

Use a Tri-point Y00 screwdriver to remove the four 4.1 mm-long screws securing the back cover.

Step 3: Pry the back cover

Step 3 - Image 1
Step 3 - Image 2

Insert an opening tool into the seam between the back cover and the metal housing.

Twist the opening tool to loosen the gasket and create a gap.

Don't try to remove the back cover all the way yet. The sensor flex cable is still connected to the motherboard.

Step 4: Disconnect the sensor flex cable

Step 4 - Image 1
Step 4 - Image 2

Lay the watch screen-side down.

Carefully swing open the back cover at the gap you just created.

Use a spudger to disconnect the sensor flex cable from the motherboard by prying the [link|https://www.ifixit.com/Guide/Recognizing+&+Disconnecting+Cable+Connectors/25629#s70308|new_window=true|press connector] straight up from its socket.

During reassembly, this is a good point to turn on your device and test your repair before resealing it.

Step 5: Remove the back cover

Step 5 - Image 1
Step 5 - Image 2

Remove the back cover.

During reassembly:

Make sure the rubber gasket (marked in red) is undamaged. If damaged, replace it with a new one to maintain water resistance.

Step 6: Disconnect the display flex cable

Step 6 - Image 1
Step 6 - Image 2

Use a spudger to disconnect the display flex cable by prying the connector straight up from its socket.

Step 7: Disconnect the button flex cable

Step 7 - Image 1
Step 7 - Image 2

Use a spudger to disconnect the button flex cable by prying the connector straight up from its socket.

Step 8: Unfasten the motherboard

Step 8 - Image 1

Use a Phillips screwdriver to remove the single 4.4 mm–long screw securing the motherboard.

Step 9: Remove the motherboard

Step 9 - Image 1
Step 9 - Image 2

Use a pair of [product|IF145-020|tweezers] or your fingers to lift the motherboard out from the watch, clearing the two flex cables.

Step 10: Lift the core assembly

Step 10 - Image 1
Step 10 - Image 2

Place one corner of the flat end of a spudger [link|https://guide-images.cdn.ifixit.com/igi/GJsM2NY3V3ov5JRX.full|new_window=true|between the core assembly and the buttons side of the frame].

Twist the spudger to lever the core assembly out of the metal housing.

Once the gap is big enough, place the spudger underneath the core assembly and lift it up.

Step 11: Remove the core assembly

Step 11 - Image 1
Step 11 - Image 2

Use a pair of [product|IF145-020|tweezers] or your fingers to remove the core assembly.

Don't accidentally poke or slice the battery with any sharp tools. A punctured battery may leak dangerous chemicals or catch fire.

Only the screen assembly remains.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $48-$210)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($80-$350)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Samsung Galaxy Watch 5 instead of replacing it, you're preventing approximately 28 kg of CO₂ emissions. Manufacturing a new Samsung Galaxy Watch 5 generates 36 kg of CO₂, while this repair only produces about 8 kg of CO₂. That's a 78% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Samsung Galaxy Watch 5 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides