Samsung Galaxy Tab S5 Screen Replacement
Complete guide to Samsung Galaxy Tab S5 screen replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Screen Replacement is one of the most common repairs for Samsung Galaxy Tab S5. This repair involves replacing the damaged display component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
🔧 Required Tools
What You'll Need
- Replacement display part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Place the plastic opening tool into the SD card slot or charge port.
Try in an upward motion until you see a separation between the tablet and back cover.
Step 2:
Work around the entire device by sliding the plastic opening tool around the rim.
If this is the first time, it will be hard to separate the back cover from the tablet.
The clips are approximately 5 cm apart. While working around the device, the clips will make a dislocating sound when disconnected.
Step 3:
Remove the back cover once all links have been separated.
Be careful when touching any of the internal components of the tablet.
Step 4:
After taking off the back cover, use a pair of [product|IF145-020|tweezers] to disconnect the two (T807) ribbons.
***Warning*** : Ribbon cables are connected with [guide|25629|ZIF connectors|stepid=64969] (Zero Insertion Force): it requires a special sequence with rotation of a plastic lever to release the pressure on contacts. Then ribbon cable can be extracted without any damage.
Step 5:
Remove the four screws holding down the battery using the Phillips #000 screwdriver.
Step 6:
Remove the battery using a spudger.
Do not use a metal spudger on the inner components of your device. The metal spudger should only be used for serious prying power as it can damage the inner components of your device.
Step 7:
Use a Phillips #00 screwdriver to remove the screw holding the motherboard.
Step 8:
Disconnect the motherboard and remove it from the device using the spudger.
The remainder of the device is the entire display assembly.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $48-$210)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($80-$350)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Samsung Galaxy Tab S5 instead of replacing it, you're preventing approximately 117 kg of CO₂ emissions. Manufacturing a new Samsung Galaxy Tab S5 generates 125 kg of CO₂, while this repair only produces about 8 kg of CO₂. That's a 94% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Samsung Galaxy Tab S5 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.