Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Display
moderate

Garmin Fenix 6 Screen Replacement

Complete guide to Garmin Fenix 6 screen replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$80 - $350
⏱️ Time:1-2 hours
🌍 CO₂ Saved:26 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$48 - $210
Labor$32 - $140
Total Estimated Cost$80 - $350

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Screen Replacement is one of the most common repairs for Garmin Fenix 6. This repair involves replacing the damaged display component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

🔧 Required Tools

What You'll Need

  • Replacement display part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1

Orient the watch so that the screen is face up.

Remove the five 6 mm black screws from the perimeter of the watch face using the T5 Torx screwdriver.

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Carefully lift up the watch face as it's attached to the motherboard by a ribbon connector.

Detach the black connector from the motherboard.

A spudger can be used if you have trouble prying the piece with your fingers.

Don't pull on the ribbon as it could tear.

When the ribbon is disconnected remove the watch face.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $48-$210)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($80-$350)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Garmin Fenix 6 instead of replacing it, you're preventing approximately 26 kg of CO₂ emissions. Manufacturing a new Garmin Fenix 6 generates 34 kg of CO₂, while this repair only produces about 8 kg of CO₂. That's a 76% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Garmin Fenix 6 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides