Garmin Approach S62 Screen Replacement
Complete guide to Garmin Approach S62 screen replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Screen Replacement is one of the most common repairs for Garmin Approach S62. This repair involves replacing the damaged display component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
🔧 Required Tools
What You'll Need
- Replacement display part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.
Step 2:
Remove the back cover carefully.
Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but ''firm''.
Step 3:
Remove the orange gasket.
Step 4:
Remove the screen and motherboard assembly from the case.
Step 5:
Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.
Step 6:
Remove the screen from the golden metal clip.
Step 7:
Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.
Step 8:
Remove the connector from the motherboard by pulling it free at the base.
Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.
Step 9:
Remove the screen from the motherboard.
Notice our tape retaining the connector to the screen. This is so easy to rip!
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $48-$210)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($80-$350)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Garmin Approach S62 instead of replacing it, you're preventing approximately 26 kg of CO₂ emissions. Manufacturing a new Garmin Approach S62 generates 34 kg of CO₂, while this repair only produces about 8 kg of CO₂. That's a 76% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Garmin Approach S62 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.