Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Haptic
easy

Xiaomi 14 Vibration Motor Repair

Complete guide to Xiaomi 14 vibration motor repair. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$40 - $110
⏱️ Time:30 min - 1 hour
🌍 CO₂ Saved:58 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$24 - $66
Labor$16 - $44
Total Estimated Cost$40 - $110

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Vibration Motor Repair is one of the most common repairs for Xiaomi 14. This repair involves replacing the damaged haptic component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement haptic part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1: Turning off the Roborock

Step 1 - Image 1
Step 1 - Image 2

Turn off the device by pressing and holding the power button.

Step 2: Remove the dustbin

Step 2 - Image 1

Open the cover upwards.

Lift the dustbin upward to remove it.

Step 3: Removing the main brush

Step 3 - Image 1
Step 3 - Image 2

Remove the main brush holder by pressing both locks inward and lifting it up.

Remove the main brush.

Step 4: Removing the side brush

Step 4 - Image 1
Step 4 - Image 2

Remove the screw holding the side brush.

You don't need to completely unscrew the screw; simply loosen it and remove it with the brush.

Remove the side brush along with the screw by lifting it upward.

Step 5: Removing the front wheel.

Step 5 - Image 1
Step 5 - Image 2

Lift the front wheel with the screwdriver.

Completely pull the front wheel upward to remove it.

Step 6: Remove the bottom panel

Step 6 - Image 1
Step 6 - Image 2

Remove the seven screws holding the bottom panel.

Lift the bottom cover up.

Step 7:

Step 7 - Image 1
Step 7 - Image 2

Remove the three screws from the motor

Pull the motor out upwards (plug connection with the circuit board)

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $24-$66)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($40-$110)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Xiaomi 14 instead of replacing it, you're preventing approximately 58 kg of CO₂ emissions. Manufacturing a new Xiaomi 14 generates 60 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 97% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Xiaomi 14 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides