Whirlpool Bottom Freezer Refrigerator Washing Machine Belt Replacement

Washing Machine Belt Replacement is one of the most common repairs for Whirlpool Bottom Freezer Refrigerator. This repair involves replacing the damaged mechanical component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

What You'll Need

• Replacement mechanical part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1: Open the freezer door

Pull the handle of the freezer door towards you to open it.

Step 2: Open the refrigerator door

Pull the handle of the refrigerator door towards you to open it.

Step 3: Move the shelf to the left

Slide the shelf to the left side of the freezer.

Keep track of the position of each shelf as you remove it; there are two slightly different sizes.

Step 4: Tilt the right edge of the shelf up

Lift the right edge of the shelf upward to tilt it.

Step 5: Remove the shelf

Shift the shelf back to the right while keeping it tilted. It should now be released from its slot and you can remove it from the freezer.

Step 6: Repeat for remaining shelves

Repeat these steps for any other shelves you wish to remove.

Step 7: Remove the bottom bin

Slide and remove the bottom bin from the freezer portion.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Whirlpool Bottom Freezer Refrigerator instead of replacing it, you're preventing approximately 295 kg of CO₂ emissions. Manufacturing a new Whirlpool Bottom Freezer Refrigerator generates 300 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 98% reduction in carbon emissions!