Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Water System
moderate

Whirlpool Bottom Freezer Refrigerator Dishwasher Pump Replacement

Complete guide to Whirlpool Bottom Freezer Refrigerator dishwasher pump replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$150 - $300
⏱️ Time:1-2 hours
🌍 CO₂ Saved:292 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$90 - $180
Labor$60 - $120
Total Estimated Cost$150 - $300

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Dishwasher Pump Replacement is one of the most common repairs for Whirlpool Bottom Freezer Refrigerator. This repair involves replacing the damaged water system component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

What You'll Need

  • Replacement water system part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1: Open the freezer door

Step 1 - Image 1

Pull the handle of the freezer door towards you to open it.

Step 2: Open the refrigerator door

Step 2 - Image 1

Pull the handle of the refrigerator door towards you to open it.

Step 3: Move the shelf to the left

Step 3 - Image 1
Step 3 - Image 2

Slide the shelf to the left side of the freezer.

Keep track of the position of each shelf as you remove it; there are two slightly different sizes.

Step 4: Tilt the right edge of the shelf up

Step 4 - Image 1

Lift the right edge of the shelf upward to tilt it.

Step 5: Remove the shelf

Step 5 - Image 1

Shift the shelf back to the right while keeping it tilted. It should now be released from its slot and you can remove it from the freezer.

Step 6: Repeat for remaining shelves

Step 6 - Image 1

Repeat these steps for any other shelves you wish to remove.

Step 7: Remove the bottom bin

Step 7 - Image 1

Slide and remove the bottom bin from the freezer portion.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $90-$180)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($150-$300)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Whirlpool Bottom Freezer Refrigerator instead of replacing it, you're preventing approximately 292 kg of CO₂ emissions. Manufacturing a new Whirlpool Bottom Freezer Refrigerator generates 300 kg of CO₂, while this repair only produces about 8 kg of CO₂. That's a 97% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Whirlpool Bottom Freezer Refrigerator and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides