Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Connectivity
easy

Samsung Galaxy Tab S5 Charging Port Repair

Complete guide to Samsung Galaxy Tab S5 charging port repair. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$40 - $120
⏱️ Time:30 min - 1 hour
🌍 CO₂ Saved:122 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$24 - $72
Labor$16 - $48
Total Estimated Cost$40 - $120

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Charging Port Repair is one of the most common repairs for Samsung Galaxy Tab S5. This repair involves replacing the damaged connectivity component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement connectivity part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Place the plastic opening tool between the face of the display and rim of the back cover of the device.

Move the plastic opening tool in a downward motion until you see separation between the tablet and back cover.

Step 2:

Step 2 - Image 1

By sliding the plastic opening tool around the rim of the device, carefully continue to pry apart the screen and back cover.

Try to separate evenly on all sides until the screen detaches from the device backing completely.

If this is the first time removing the back cover, it will be rather difficult to separate it from the tablet.

Step 3:

Step 3 - Image 1

Remove the back cover after the entire rim is disconnected.

Step 4:

Step 4 - Image 1
Step 4 - Image 2

The battery is glued down, usually with double-sided tape along the sides. The goal is to lift the battery out by pulling on the folded white tab in the top right corner. It may be necessary to first loosen the adhesive by running a flat, thin plastic tool under the edges of the battery.

Be careful when lifting the battery out, it is still connected to the device.

Step 5:

Step 5 - Image 1
Step 5 - Image 2

Gently grasp and lift up the light green connector located near the bottom left corner of the battery. It is connected to the battery by red, green, and black wires.

Do not yank the connector by the wires. If it does not disconnect easily, slide a plastic opening tool between the white connector and the board to lift the connector away from the board.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $24-$72)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($40-$120)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Samsung Galaxy Tab S5 instead of replacing it, you're preventing approximately 122 kg of CO₂ emissions. Manufacturing a new Samsung Galaxy Tab S5 generates 125 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 98% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Samsung Galaxy Tab S5 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides