Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Optics
moderate

Samsung Galaxy Tab A7 Camera Repair

Complete guide to Samsung Galaxy Tab A7 camera repair. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$60 - $250
⏱️ Time:30 min - 1 hour
🌍 CO₂ Saved:96 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$36 - $150
Labor$24 - $100
Total Estimated Cost$60 - $250

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Camera Repair is one of the most common repairs for Samsung Galaxy Tab A7. This repair involves replacing the damaged optics component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement optics part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1

Make sure the device is turned off before attempting to disassemble it.

At the top portion of the memory card slot, use the small metal spudger to create separation between the back cover and the rest of the device.

The small metal spudger is only used to create separation between the back cover and the rest of the device, not to remove the back cover.

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Use the intermediate metal spudger in place of the small metal spudger to remove the back cover. This is done by sliding the intermediate metal spudger around the perimeter of the device, beginning at the top portion of the memory card slot.

The second picture shows the internal portion of the device once the back cover is removed.

Step 3:

Step 3 - Image 1
Step 3 - Image 2

Use the spudger to disconnect the camera from the motherboard.

This step should be done at the yellow rubber portion of the camera.

The first and second pictures show what the camera looks like when it is still connected to the motherboard and once it is disconnected, respectively.

Step 4:

Step 4 - Image 1

Use the spudger to remove the main body of the camera from the rest of the device. This should be done anywhere around the black-framed perimeter of the camera.

Step 5:

Step 5 - Image 1
Step 5 - Image 2

Use the [product|IF145-020|tweezers] to fully remove the camera from the rest of the device. The camera should be pulled out and away from where the device was connected to the motherboard in Step 3.

The second picture illustrates what the device should look like once the camera is removed.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $36-$150)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($60-$250)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Samsung Galaxy Tab A7 instead of replacing it, you're preventing approximately 96 kg of CO₂ emissions. Manufacturing a new Samsung Galaxy Tab A7 generates 100 kg of CO₂, while this repair only produces about 4 kg of CO₂. That's a 96% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Samsung Galaxy Tab A7 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides