Samsung Galaxy Tab A5 Home Button Repair
Complete guide to Samsung Galaxy Tab A5 home button repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Home Button Repair is one of the most common repairs for Samsung Galaxy Tab A5. This repair involves replacing the damaged input component with a new or refurbished part. The process typically takes 20-40 min and requires easy skill level.
🔧 Required Tools
What You'll Need
- Replacement input part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Insert a metal spudger between the back case and the screen of the device.
The back cover is attached to the device by a series of snaps. The snaps are positioned about an inch from each other.
Move the spudger along the perimeter of the device while it is in between the back case and the screen to open each snap.
There will be an audible click every time a snap releases.
Step 2:
Remove the two 2.8 mm Phillips #000 screws from the speakers.
Step 3:
Each speaker is now only connected to the main device by small plastic snaps.
Pry the speakers from the device at these two points using the [product|IF145-013|heavy duty spudger].
Step 4:
Remove the four 2.8mm #000 Phillips screws that hold the charging port and headphone jack in place.
Step 5:
Disconnect the green square connector from the motherboard. To do so, put the flat end of the plastic opening tool underneath the connector and push down.
During reassembly, two clicks signify the charging board is completely attached to the motherboard.
Step 6:
Place the [product|IF145-013|heavy duty spudger] underneath the charging port and push down to remove the charging port.
To reinsert the charging port, angle the port downwards towards the battery. Then press down the outside edge of the charging port.
Step 7:
Peel the charging assembly from the device to completely remove the charging port from the device.
Step 8:
Using a plastic spudger, work around the edge of the screen, prying the screen away from the devise.
Once the the cover is removed, set it aside.
Step 9:
Using the [product|IF145-020|tweezers] or a plastic spudger, press on the back of the button until it pops out.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $24-$60)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($40-$100)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Samsung Galaxy Tab A5 instead of replacing it, you're preventing approximately 98 kg of CO₂ emissions. Manufacturing a new Samsung Galaxy Tab A5 generates 100 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 98% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Samsung Galaxy Tab A5 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.