Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Recovery
difficult

Samsung Galaxy S18 Plus Water Damage Repair

Complete guide to Samsung Galaxy S18 Plus water damage repair. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$100 - $400
⏱️ Time:2-4 hours
🌍 CO₂ Saved:57 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$60 - $240
Labor$40 - $160
Total Estimated Cost$100 - $400

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Water Damage Repair is one of the most common repairs for Samsung Galaxy S18 Plus. This repair involves replacing the damaged recovery component with a new or refurbished part. The process typically takes 2-4 hours and requires difficult skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement recovery part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Unscrew 7 screws on the rear using a Phillips screw driver.

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Unhook the rear using a soft plastic prying tool to remove the rear cover

'''Be careful not to damage the rear cover when unhooking it.'''

Step 3:

Step 3 - Image 1

Detach the Power Key FPCB, that is stick to the bracket by a double-sided tape, using [product|IF145-020|tweezers]. Make sure to remove all remaining tape on the bracket.

Step 4:

Step 4 - Image 1

Disconnect LCD Connector,Receiver Connector, Sub-touch Key Connector and Antenna cable from the Main PBA

'''Disconnecting the camera connector isn't necessary!'''

Step 5:

Step 5 - Image 1

After disconnecting the connectors carefully pull the Main PBA out of the bracket.

'''Make sure that the Power Key FPCB does not get stuck!'''

Step 6:

Step 6 - Image 1
Step 6 - Image 2

Remove the antenna cable from the main Antenna PCB on the sub-touch key module of your broken Screen Digitizer Frame

Pull out the Receiver module from the bracket. Be careful not to damage the FPC.

'''Now assembly both Receiver module and antenna cable into the new Screen Digitizer Frame and reverse the process of disassembly!'''

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $60-$240)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($100-$400)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Samsung Galaxy S18 Plus instead of replacing it, you're preventing approximately 57 kg of CO₂ emissions. Manufacturing a new Samsung Galaxy S18 Plus generates 67 kg of CO₂, while this repair only produces about 10 kg of CO₂. That's a 85% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Samsung Galaxy S18 Plus and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides