Samsung Galaxy A24 Home Button Repair
Complete guide to Samsung Galaxy A24 home button repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Home Button Repair is one of the most common repairs for Samsung Galaxy A24. This repair involves replacing the damaged input component with a new or refurbished part. The process typically takes 20-40 min and requires easy skill level.
🔧 Required Tools
What You'll Need
- Replacement input part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Remove all external power and turn off the tablet.
Insert a plastic opening tool between the screen and rear casing.
Pry the screen and rear casing apart.
Step 2:
Remove the three green pieces of tape covering the white, black, and gold ribbon cables.
Use a spudger to flip up the retaining flap on the three ribbon cable [https://www.ifixit.com/Guide/Recognizing+%26+Disconnecting+Cable+Connectors/25629#s64969|ZIF] sockets.
Pull the ribbon cables out of the sockets.
Step 3:
Remove the ten 4mm Phillips #000 screws from the battery.
Use a plastic opening tool to pry up the battery.
Remove the battery.
Step 4:
Remove the green protective tape from the three ZIF connectors on the motherboard.
Use a spudger to flip up the retaining flap on the three ribbon cable [https://www.ifixit.com/Guide/Recognizing+%26+Disconnecting+Cable+Connectors/25629#s64969|ZIF] sockets.
Pull the ribbon cables out of their sockets.
Step 5:
Remove the six 4mm Phillips #000 screws from the motherboard.
Remove the motherboard.
Step 6:
Insert a plastic opening tool between the screen and bezel.
Slide the plastic opening tool around the perimeter while applying a prying motion.
Remove the screen from the display.
Applying heat may be needed to loosed the glue.
Step 7:
Locate the Home button on the front of the panel and carefully lift the gold ribbon surrounding it from RIGHT to LEFT.
Step 8:
Using your Phillips #000 screwdriver Remove the two 4mm Phillips #000 screws from the home button.
Step 9:
Remove the home button by sliding it to the left or right while pulling up.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $24-$60)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($40-$100)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Samsung Galaxy A24 instead of replacing it, you're preventing approximately 58 kg of CO₂ emissions. Manufacturing a new Samsung Galaxy A24 generates 60 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 97% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Samsung Galaxy A24 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.