Realme 8 Camera Repair

Camera Repair is one of the most common repairs for Realme 8. This repair involves replacing the damaged optics component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.

🔧 Required Tools

What You'll Need

• Replacement optics part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

To remove the back, insert thumbnail into MicroUSB port, and pull up to loosen back.

Use nail to loosen case on all four sides. Once loose, remove back case.

Step 2:

Insert thumbnail into tab below battery.

Pull away from phone and remove.

Step 3:

Once the back cover and battery are removed, use the Phillips #J000 screwdriver to remove all 11 screws located around the plastic midframe.

Step 4:

Using the plastic opening tool, carefully pry and separate the plastic midframe from the rest of the phone.

Step 5:

Locate the front facing camera in the top left hand corner of the motherboard. Using the plastic opening tool, separate the ribbon cable from the phone.

Step 6:

After removing this ribbon cable, you will be able to easily remove the front facing camera with your fingers.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Realme 8 instead of replacing it, you're preventing approximately 54 kg of CO₂ emissions. Manufacturing a new Realme 8 generates 58 kg of CO₂, while this repair only produces about 4 kg of CO₂. That's a 93% reduction in carbon emissions!