OnePlus 11 Speaker Repair
Complete guide to OnePlus 11 speaker repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Speaker Repair is one of the most common repairs for OnePlus 11. This repair involves replacing the damaged audio component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.
🔧 Required Tools
What You'll Need
- Replacement audio part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Turn on the heat gun to a low heat and and gently heat the curved edges on the back of the phone.
Be careful not to overheat or melt the plastic; heat guns can get out of hand quickly!
Wedge the opening picks between the front and back panel and slide them around the perimeter to break the adhesive securing the back cover.
Repeat until the back panel is fully released.
Step 2:
Gently lift up the back panel, with care not to damage the fingerprint sensor ribbon cable.
Step 3:
Use a pair of [product|IF145-020|tweezers] to gently pull up on the red tab and disconnect the cable from the device.
Completely remove the back panel from the device.
Step 4:
Grip the green tab connected to the battery and pull the battery directly up and out.
Step 5:
Use a Phillips #000 screwdriver to remove the eight screws.
Carefully lift the speaker up and out of the chassis.
If you're completing a screen replacement, skip to Step 9.
Step 6:
Properly orient the new speaker unit and use a Phillips #000 screwdriver to replace the eight screws removed from the previous step.
Step 7:
Place the battery back into the phone and connect it to the same port, making sure to firmly press the connection down into place.
Place the red cover back over the top of the port.
Step 8:
Strip the existing adhesive, and place new adhesive around the entire perimeter of the back cover.
Replace the back cover and hold it down for about a minute to to let the adhesive set.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $30-$90)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($50-$150)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your OnePlus 11 instead of replacing it, you're preventing approximately 58 kg of CO₂ emissions. Manufacturing a new OnePlus 11 generates 61 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 95% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your OnePlus 11 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.