Skip to main content
Temperature Control
moderate

Nothing Phone (1) Plus Dryer Thermostat Replacement

Complete guide to Nothing Phone (1) Plus dryer thermostat replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$75 - $200
⏱️ Time:1-2 hours
🌍 CO₂ Saved:59 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$45 - $120
Labor$30 - $80
Total Estimated Cost$75 - $200

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Dryer Thermostat Replacement is one of the most common repairs for Nothing Phone (1) Plus. This repair involves replacing the damaged temperature control component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

What You'll Need

  • Replacement temperature control part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

  1. Power off the device - Always turn off and unplug your Nothing Phone (1) Plus before starting any repair.
  2. Remove outer screws - Carefully remove the screws securing the device casing.
  3. Disconnect components - Gently disconnect any cables or connectors.
  4. Remove damaged part - Carefully extract the damaged component.
  5. Install new part - Place the replacement part and reconnect all cables.
  6. Reassemble - Secure all screws and test functionality before final assembly.
  7. Test thoroughly - Power on and verify all features work correctly.

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $45-$120)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($75-$200)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Nothing Phone (1) Plus instead of replacing it, you're preventing approximately 59 kg of CO₂ emissions. Manufacturing a new Nothing Phone (1) Plus generates 62 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 95% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Nothing Phone (1) Plus and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides