Nokia T18 Speaker Repair

Speaker Repair is one of the most common repairs for Nokia T18. This repair involves replacing the damaged audio component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.

🔧 Required Tools

What You'll Need

• Replacement audio part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Press down the button on the back panel.

Step 2:

Push the back cover upwards.

Step 3:

Remove the back cover from the phone.

Step 4:

Press the silver button on the top of the phone.

Step 5:

Slide your thumbnail down the case seam to separate the rest of the case.

Step 6:

Gently remove the case.

Careful! Do not bend the plastic tabs.

Step 7:

Using a T6 Torx Screwdriver, unscrew and remove the six screws shown in the picture.

Step 8:

Remove the panel that covers the motherboard.

If replacing the speaker, stop at this step and skip forward to the first step of the speaker guide.

Step 9:

Remove the LCD screen frame.

Step 10:

Remove the motherboard.

Step 11:

Locate the speaker on the back of the removed panel.

Step 12:

Use nails to gently lift the speaker up; speaker may be slightly glued to the panel.

Step 13:

When the speaker is loose, gently lift the speaker out of the panel.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Nokia T18 instead of replacing it, you're preventing approximately 97 kg of CO₂ emissions. Manufacturing a new Nokia T18 generates 100 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 97% reduction in carbon emissions!