Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Logic
difficult

Nokia G300 Logic Board Repair

Complete guide to Nokia G300 logic board repair. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$300 - $800
⏱️ Time:3-6 hours
🌍 CO₂ Saved:36 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$180 - $480
Labor$120 - $320
Total Estimated Cost$300 - $800

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Logic Board Repair is one of the most common repairs for Nokia G300. This repair involves replacing the damaged logic component with a new or refurbished part. The process typically takes 3-6 hours and requires difficult skill level.

🔧 Required Tools

What You'll Need

  • Replacement logic part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Flip the Nokia 3300B over with the back-side facing towards you.

Gently press the button on the back of the battery cover to release the cover and slide up.

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Lift the battery out of the back of the phone.

It is easiest to lift the battery out of the phone from the right-hand side, as seen in the picture.

Step 3:

Step 3 - Image 1
Step 3 - Image 2

Gently push the blue tabs on the top of the phone out of their slots.

With the phone facing up, pop the blue faceplate off by using your fingernail (or some [product|IF145-020|tweezers]) and working your way around the phone.

Note: If the blue cover does not detach easily use your finger nails to try and split it open, as seen in the picture.

Step 4:

Step 4 - Image 1

With the screen still facing you, lift and remove the blue faceplate.

Step 5:

Step 5 - Image 1

Grab the sides of the keypad and lift each side up vertically, until the keypad is completely removed.

If you encounter resistance while removing the keypad, be sure to lift up evenly on both sides to ensure that the pins do not snap.

When replacing the keypad, make sure that the plastic pegs all enter their proper holes.

Step 6:

Step 6 - Image 1
Step 6 - Image 2

Remove the six Torx T6 screws from the phone's front case.

Step 7:

Step 7 - Image 1

Pull up on the front case containing the screen to separate it from the rest of the phone.

Gently lift the main board out of the back case.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $180-$480)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($300-$800)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Nokia G300 instead of replacing it, you're preventing approximately 36 kg of CO₂ emissions. Manufacturing a new Nokia G300 generates 56 kg of CO₂, while this repair only produces about 20 kg of CO₂. That's a 64% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Nokia G300 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides