Nokia 6.2 Charging Port Repair

Charging Port Repair is one of the most common repairs for Nokia 6.2. This repair involves replacing the damaged connectivity component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires easy skill level.

🔧 Required Tools

What You'll Need

• Replacement connectivity part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Be sure cell phone is off before you begin to disassemble the phone.

Press the button on the bottom of the back of the cell phone.

Slide rear panel down and remove it.

Step 2:

Using your fingernail, pry the back of the battery upwards and pull out.

Step 3:

Insert the plastic opening tool under the faceplate.

Separate the faceplate from main body by twisting the prying tool with some force.

The faceplate is held by three plastic fasteners, so pry evenly on both sides of phone.

Step 4:

With the faceplate removed, simply peel off rubber key pad and remove.

Step 5:

Locate and remove the six screws on the front of the phone using a T6 Torx.

All 6 screws are 6.9mm long.

Step 6:

After removing screws, lift the motherboard assembly straight off the cell phone body.

Step 7:

With the logic board and LCD unit removed, gently pry out the charging port.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Nokia 6.2 instead of replacing it, you're preventing approximately 53 kg of CO₂ emissions. Manufacturing a new Nokia 6.2 generates 56 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 95% reduction in carbon emissions!