Nokia 5.4 Vibration Motor Repair

Vibration Motor Repair is one of the most common repairs for Nokia 5.4. This repair involves replacing the damaged haptic component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires easy skill level.

What You'll Need

• Replacement haptic part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

To take off the housing you need to turn the device upside down and push the release button down at the bottom of the phone and pull the cover down with your thumbs until you hear a click, and the cover should come free

Step 2: Undoing clips and lifting off bezel

To take off the front bezel you need to put your nails under the clips pictured and pry off the case

Step 3: Lifting off bezel

With the housing unclipped you should be able to lift it off.

Step 4: Removing button pads

Lift off the buttons to reveal a bare contact pad. Now you have removed the housing !

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Nokia 5.4 instead of replacing it, you're preventing approximately 54 kg of CO₂ emissions. Manufacturing a new Nokia 5.4 generates 56 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 96% reduction in carbon emissions!