Motorola Moto G Stylus Speaker Repair

Speaker Repair is one of the most common repairs for Motorola Moto G Stylus. This repair involves replacing the damaged audio component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.

🔧 Required Tools

What You'll Need

• Replacement audio part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Use a SIM eject tool to remove the SIM tray.

Gently pull the SIM tray from the left side when the screen is facing upward.

Step 2:

Push the tip of the stylus to release the lock.

With the screen facing up, remove the stylus from the bottom-right corner of the phone.

Step 3:

Place the screen facing downward.

Use the small suction cup to create a gap for the opening pick to fit.

''Place the suction cup near a corner for easier access to insert the opening pick. ''

Insert the opening pick into a corner of the phone and move around the backing to release the adhesive.

Pull the backing off of the phone.

Step 4:

Use tweezers to remove the yellow tape.

Step 5:

Remove the six 3.2 mm screws from the speaker using a Phillips #0 screwdriver.

Step 6:

Peel off the graphite film with tweezers.

Step 7:

Pry off the speaker module with the iFixit opening pick.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Motorola Moto G Stylus instead of replacing it, you're preventing approximately 56 kg of CO₂ emissions. Manufacturing a new Motorola Moto G Stylus generates 59 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 95% reduction in carbon emissions!