LG Top Load Washing Machine Dryer Heating Element Replacement
Complete guide to LG Top Load Washing Machine dryer heating element replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Dryer Heating Element Replacement is one of the most common repairs for LG Top Load Washing Machine. This repair involves replacing the damaged heating component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
🔧 Required Tools
What You'll Need
- Replacement heating part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Before you begin your repair, perform the following:
Turn off the main water supply
Unplug your washer
Disconnect all water connections at the rear of your washer
Step 2: Unfasten the top panel
Remove the screw(s) securing the top panel brackets to the back panel.
You don't need to remove the screws securing the brackets to the top panel.
Step 3: Remove the top panel
Slide the top panel towards the rear of the device to disconnect its clips.
Step 4:
Tilt the top panel upward to completely disconnect it from the chassis.
Remove the top panel.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $60-$150)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($100-$250)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your LG Top Load Washing Machine instead of replacing it, you're preventing approximately 194 kg of CO₂ emissions. Manufacturing a new LG Top Load Washing Machine generates 200 kg of CO₂, while this repair only produces about 6 kg of CO₂. That's a 97% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your LG Top Load Washing Machine and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.