LG G9 Volume Button Repair
Complete guide to LG G9 volume button repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Volume Button Repair is one of the most common repairs for LG G9. This repair involves replacing the damaged input component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires easy skill level.
🔧 Required Tools
What You'll Need
- Replacement input part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
With the tablet face down, pull the SD card slot cover out.
Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.
Step 2:
Insert a plastic opening tool in the small crevasse between the screen and the back panel.
Pry the screen away from the back panel.
Repeat this on each edge of the device.
We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.
This requires heavy force. The back of the device is attached with an adhesive. If the back panel is too hard to remove, use the [https://www.ifixit.com/Guide/iOpener+Instructions/11677|iOpener].
Step 3:
After using the plastic opening tools, pry the device open with your hands.
Remove the back panel from the screen.
Step 4:
With the screen facing towards you and the top of the tablet towards your left, locate the volume buttons on the left side.
Using a spudger or your hands, remove the volume control buttons, which are attached with adhesive.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $27-$72)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($45-$120)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your LG G9 instead of replacing it, you're preventing approximately 59 kg of CO₂ emissions. Manufacturing a new LG G9 generates 61 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 97% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your LG G9 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.