Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Audio
moderate

LG G3 Speaker Repair

Complete guide to LG G3 speaker repair. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$50 - $150
⏱️ Time:30 min - 1 hour
🌍 CO₂ Saved:58 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$30 - $90
Labor$20 - $60
Total Estimated Cost$50 - $150

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Speaker Repair is one of the most common repairs for LG G3. This repair involves replacing the damaged audio component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.

🔧 Required Tools

What You'll Need

  • Replacement audio part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1

Locate the notch on the bottom right of the phone.

Step 2:

Step 2 - Image 1

Gently pull the cover on the back of the phone off to locate the battery.

Step 3:

Step 3 - Image 1

Remove the battery by lifting from the slot at the bottom of the battery.

Step 4:

Step 4 - Image 1

Remove the twelve Phillips #00 screws securing the midframe to the rest of the phone.

Step 5:

Step 5 - Image 1
Step 5 - Image 2

Work a plastic opening tool around the perimeter of the phone to separate the midframe from the rest of the phone.

Step 6:

Step 6 - Image 1

Use the spudger to gently unplug the ribbon cable connected to the motherboard. Then remove the rear facing camera.

Step 7:

Step 7 - Image 1
Step 7 - Image 2

Use the spudger to gently unplug the ribbon cable connected to the motherboard.

Remove the front camera.

Step 8:

Step 8 - Image 1

Use the flat edge of a spudger to disconnect the motherboard ribbon connector.

Step 9:

Step 9 - Image 1
Step 9 - Image 2

Use the pointed end of a spudger to push back the two motherboard retaining flaps.

The motherboard should now be able to be lifted out of the device.

Step 10:

Step 10 - Image 1

Remove the earpiece speaker with the metal spudger by prying it out.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $30-$90)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($50-$150)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your LG G3 instead of replacing it, you're preventing approximately 58 kg of CO₂ emissions. Manufacturing a new LG G3 generates 61 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 95% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your LG G3 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides