Lenovo Tab M10 Charging Port Repair
Complete guide to Lenovo Tab M10 charging port repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Charging Port Repair is one of the most common repairs for Lenovo Tab M10. This repair involves replacing the damaged connectivity component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires easy skill level.
🔧 Required Tools
What You'll Need
- Replacement connectivity part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Place the tablet face down on a soft, stable surface that will protect the screen.
Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.
Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.
If the seal covering the screw has already been removed, please proceed to the next step in the process.
As the screw is small, you may wish to extract it using a pair of [product|IF145-020|tweezers].
Step 2:
Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.
Some force may be required initially to pry the back cover off.
Note that the button tabs for this device are loose inside the case and will fall out when opening.
Step 3:
Using the Phillips #000 screwdriver, remove the four M1.4 × 2.5 screws holding the motherboard in place.
Because the screws are small, it is a good idea to remove them with a pair of [product|IF145-020|tweezers].
Step 4:
Remove the M1.4 × 2.5 screw securing the battery lead to the battery with the Phillips #000 screwdriver.
With a pair of tweezers, gently move the battery lead so it will not obstruct the motherboard.
With a pair of tweezers, carefully unplug the strip connecting the screen to the motherboard.
The strip connecting the screen to the motherboard is firmly in place and may require some careful use of strength to unplug it.
Step 5:
Remove the motherboard by lifting the top edge and pulling outward to free it from the small tabs that hold it in place.
The small tabs can be broken if the motherboard is pried up too forcefully.
The button tabs are fastened to the motherboard by a small adhesive strip. Take care in removing the motherboard to avoid tearing the wires.
Step 6:
Flip the motherboard on to its back side.
The back side has less components on that side. You should see more green color than the front side.
Desolder the six soldering joints around the charging port.
With a set of [product|IF145-020|tweezers], gentle lift the charging port off motherboard.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Difficult | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $24-$72)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($40-$120)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Lenovo Tab M10 instead of replacing it, you're preventing approximately 102 kg of CO₂ emissions. Manufacturing a new Lenovo Tab M10 generates 105 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 97% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Lenovo Tab M10 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.