HP Envy 2022 Speaker Repair
Complete guide to HP Envy 2022 speaker repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Speaker Repair is one of the most common repairs for HP Envy 2022. This repair involves replacing the damaged audio component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.
🔧 Required Tools
What You'll Need
- Replacement audio part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
There are 12 phillips head screws which need to be unscrewed before removing the backplate of the laptop.
Step 2:
Next, use a size PH1 Philips head screw driver to remove the screws.
Step 3:
Then, use a prying tool to help uncouple the backplate.
Step 4:
Finally, use both hands to lift up and take off the back plate of the computer.
Step 5:
Remove the two screws holding the speaker in place.
There are two red rubber grommets which stay situated in the screw guide holes; be sure not to lose these.
Step 6:
Once the screws have been removed, gently lift the speaker straight up, but just enough to dislodge it.
There is a cable connecting the speakers to the sound board. Be sure to not tug on this connection when lifting the speaker.
Step 7:
Once the speaker is dislodged, gently pull the connecting cable from the sound card.
The speaker is now fully removed and ready to be replaced.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $30-$90)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($50-$150)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your HP Envy 2022 instead of replacing it, you're preventing approximately 262 kg of CO₂ emissions. Manufacturing a new HP Envy 2022 generates 265 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 99% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your HP Envy 2022 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.