Google Pixel Slate Speaker Repair
Complete guide to Google Pixel Slate speaker repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Speaker Repair is one of the most common repairs for Google Pixel Slate. This repair involves replacing the damaged audio component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.
🔧 Required Tools
What You'll Need
- Replacement audio part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Orient the Google Pixel Slate so that the screen is facing upwards.
Use the iFixit opening tool to separate screen from main body.
Use the suction cup to remove the screen from the body of the device.
Step 2:
Gently disconnect the three flat-wires from the screen.
Carefully separate and remove the screen from the body of the device.
Step 3:
There are two speakers, one on each side of the Google Pixel Slate. This guide works for either one.
Use the T2 Torx screwdriver to remove the yellow 2mm screw from the thin metal plate.
Use the T3 Torx screwdriver to remove the pink 3mm screw from the thin metal plate.
Remove the thin metal plate from the device.
Step 4:
Use the T2 Torx screwdriver to remove the two black 2mm screws from the speaker.
Step 5:
Use the Nylon-Tipped [product|IF145-020|Tweezers] to remove the black plug.
There is a red and a black wire connected to the black plug.
Pull the black plug in an upwards direction.
Be sure to ***gently*** remove plug, as using too much force can damage the connecting wires.
Step 6:
Use the Nylon-Tipped Tweezers to disconnect the black tape-like plug connected to the speaker.
Step 7:
Detach the speaker wire from the motherboard.
Remove the adhesive strips that hold down the speaker wire.
Step 8:
Use the T2 Torx screwdriver to remove the 2mm black screw from the brass plate.
Pull back the brass plate.
Step 9:
You can now remove the speaker from the device.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $30-$90)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($50-$150)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Google Pixel Slate instead of replacing it, you're preventing approximately 127 kg of CO₂ emissions. Manufacturing a new Google Pixel Slate generates 130 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 98% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Google Pixel Slate and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.