Google Pixel 6 Back Glass Replacement
Complete guide to Google Pixel 6 back glass replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Back Glass Replacement is one of the most common repairs for Google Pixel 6. This repair involves replacing the damaged housing component with a new or refurbished part. The process typically takes 1-3 hours and requires difficult skill level.
What You'll Need
- Replacement housing part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Use the wet wipe included in your kit to clean the rear camera glass panel.
Dry off the rear camera glass panel with the dry wipe.
Step 2:
Carefully cut around the edges of the phone's rear glass panel using an X-Acto knife.
***Caution:*** Hazardous situation which involves a sharp utensil and glass fragments.
Step 3:
Using the tweezers, begin chipping and tweezing away at the cracked region.
++***Caution:*** Shards and shrapnel can splinter off of the panel.++
Keep some masking tape near to be able to pick up shrapnel without injuring yourself.
Step 4:
Use the metal spudger to remove the larger pieces of the glass to expose the layer underneath.
***Caution:*** Hastily removing sharp fragments pieces could result in injury.
Step 5:
Use the opening tool to remove excess glue leftover from the old glass panel.
Perform this step only when all glass has been removed from the camera area.
Step 6:
Take a piece of masking tape about 3 inches wide.
Gently press the masking tape (sticky side down) onto the rear camera lens and lift, removing the glass debris.
Repeat until most of the glass debris is removed.
Step 7:
Align the glass panel replacement with the exposed camera area.
Press the glass panel firmly into the camera area.
Do not press too hard to avoid cracking glass from excess pressure.
Let the glass panel adhesive dry for approximately two hours before using the phone.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $42-$108)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($70-$180)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Google Pixel 6 instead of replacing it, you're preventing approximately 54 kg of CO₂ emissions. Manufacturing a new Google Pixel 6 generates 60 kg of CO₂, while this repair only produces about 6 kg of CO₂. That's a 90% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Google Pixel 6 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.