Google Pixel 2 Logic Board Repair

Logic Board Repair is one of the most common repairs for Google Pixel 2. This repair involves replacing the damaged logic component with a new or refurbished part. The process typically takes 3-6 hours and requires difficult skill level.

What You'll Need

• Replacement logic part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Turn the keyboard locking screw so that it is parallel to the space bar.

Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the track pad.

Step 2:

Pull the keyboard ribbon straight up from the logic board. Place the keyboard aside.

The connector may be tight. Gently rock the connector from side to side while pulling directly upward to free it. You can use this technique on many of the cards and cables you'll be disconnecting.

Make sure you have removed the laptop battery and CD/DVD modules from the expansion bays before proceeding.

Step 3:

Your laptop should look approximately like this.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Google Pixel 2 instead of replacing it, you're preventing approximately 40 kg of CO₂ emissions. Manufacturing a new Google Pixel 2 generates 60 kg of CO₂, while this repair only produces about 20 kg of CO₂. That's a 67% reduction in carbon emissions!