Skip to main content
Recovery
difficult

Garmin Approach S62 Water Damage Repair

Complete guide to Garmin Approach S62 water damage repair. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$100 - $400
⏱️ Time:2-4 hours
🌍 CO₂ Saved:24 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$60 - $240
Labor$40 - $160
Total Estimated Cost$100 - $400

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Water Damage Repair is one of the most common repairs for Garmin Approach S62. This repair involves replacing the damaged recovery component with a new or refurbished part. The process typically takes 2-4 hours and requires difficult skill level.

🔧 Required Tools

What You'll Need

  • Replacement recovery part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

Step 2:

Step 2 - Image 1

Remove the back cover carefully.

Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but ''firm''.

Step 3:

Step 3 - Image 1

Remove the orange gasket.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $60-$240)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($100-$400)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Garmin Approach S62 instead of replacing it, you're preventing approximately 24 kg of CO₂ emissions. Manufacturing a new Garmin Approach S62 generates 34 kg of CO₂, while this repair only produces about 10 kg of CO₂. That's a 71% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Garmin Approach S62 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides