Fujitsu LifeBook 2020 Camera Repair
Complete guide to Fujitsu LifeBook 2020 camera repair. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Camera Repair is one of the most common repairs for Fujitsu LifeBook 2020. This repair involves replacing the damaged optics component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.
🔧 Required Tools
What You'll Need
- Replacement optics part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Remove the white sticker covering the screws ''(if applicable)''.
Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.
Step 2:
Insert the plastic opening tool along the seam of the back case.
Gently slide the plastic opening tool along the entire seam popping the clips free.
Step 3:
Carefully lift the back case and remove the smartcard ribbon from the motherboard.
Step 4:
Remove the ten 3mm screws with a PH00 screwdriver from the shield.
Step 5:
Remove the grey docking station port cover.
Step 6:
Gently slide the plastic opening tool along the entire seam popping the clips free.
Step 7:
Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.
Step 8:
Pull up the cord that connects the battery to the motherboard
Step 9:
Pull the ribbon straight up from the back of the camera board
Step 10:
Remove the single 2mm screw using a PH000 screwdriver from the camera board.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $36-$150)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($60-$250)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Fujitsu LifeBook 2020 instead of replacing it, you're preventing approximately 256 kg of CO₂ emissions. Manufacturing a new Fujitsu LifeBook 2020 generates 260 kg of CO₂, while this repair only produces about 4 kg of CO₂. That's a 98% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Fujitsu LifeBook 2020 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.