Framework Laptop 12 Charging Port Repair

Charging Port Repair is one of the most common repairs for Framework Laptop 12. This repair involves replacing the damaged connectivity component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

• Replacement connectivity part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1: Unlatch the battery

Use the corner of your Framework Screwdriver or a small pin to depress the small rectangular battery clip on the barrel of the Stylus, near the cap.

Step 2: Remove the battery

As you depress the clip, use your fingers to pull the battery straight out of the back of the Stylus to remove it.

Step 3: Install the replacement battery

To install the replacement battery:

Align the battery clip with its barrel cutout.

Slide the battery into the Stylus until you hear a click. You should feel very little resistance.

Make sure the battery's fully seated. The clip should sit flush with the barrel.

Step 4:

Plug the Stylus into your Framework Laptop 12 or a USB power source to bring the battery out of ship mode.

Once the LED lights up, unplug the Stylus. It's now ready for use!

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Framework Laptop 12 instead of replacing it, you're preventing approximately 262 kg of CO₂ emissions. Manufacturing a new Framework Laptop 12 generates 265 kg of CO₂, while this repair only produces about 3 kg of CO₂. That's a 99% reduction in carbon emissions!