Fitbit Inspire 2 Battery Replacement

Battery Replacement is one of the most common repairs for Fitbit Inspire 2. This repair involves replacing the damaged power component with a new or refurbished part. The process typically takes 30 min - 1 hour and requires moderate skill level.

🔧 Required Tools

What You'll Need

• Replacement power part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Use a spudger or your fingernail to push back the release lever on one of the two straps on the underside of the Fitbit.

You may experience some resistance from the release, but don't use excessive force, as it may damage the release levers.

Step 2:

As you pull back the release lever, shift the strap diagonally.

Remove from the Fitbit strap.

Repeat the process for the other strap.

Step 3:

Now that the old straps are detached from the Fitbit, take the opportunity to clean the watch and strap connection points.

Use a spudger to clean the inside of the strap chamber. Scrape out any residue or grime that may have built up over the past months or years.

Step 4:

Slide the replacement straps into the given slot and the lever will click back into place.

Step 5:

The straps should be secure and you can wear your watch again!

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Fitbit Inspire 2 instead of replacing it, you're preventing approximately 27 kg of CO₂ emissions. Manufacturing a new Fitbit Inspire 2 generates 32 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 84% reduction in carbon emissions!