Acer Aspire 7 Trackpad Replacement
Complete guide to Acer Aspire 7 trackpad replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Trackpad Replacement is one of the most common repairs for Acer Aspire 7. This repair involves replacing the damaged input component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
🔧 Required Tools
🔩 Replacement Parts
What You'll Need
- Replacement input part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Remove the three screws from the plate that covers the RAM and HDD using a Phillips #0 screwdriver.
Remove the plate from the laptop.
Step 2:
Remove the DVD drive and the three screws that are underneath it.
Remove all the screws surrounding the backplate.
Step 3:
Disconnect the speaker wire beneath the RAM.
Gently remove the backplate from the laptop.
Step 4:
Remove the five screws from the heat sink.
Take a cotton ball and dab it with isopropyl alcohol.
Use the cotton ball to wipe the old thermal paste from the heat sink.
Step 5:
Take another cotton ball, dab it with isopropyl alcohol, and gently wipe the thermal paste off of the GPU and CPU.
There is no need to rub hard as it should come off with ease.
Once the thermal paste is completely off, let the heat sink dry for a couple of minutes.
Apply a dab of new thermal paste in the middle of the CPU and GPU.
Corsair TM30 thermal paste is used in this guide.
Step 6:
Put the heatsink back on and screw it in place.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $48-$120)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($80-$200)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your Acer Aspire 7 instead of replacing it, you're preventing approximately 249 kg of CO₂ emissions. Manufacturing a new Acer Aspire 7 generates 255 kg of CO₂, while this repair only produces about 6 kg of CO₂. That's a 98% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your Acer Aspire 7 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.