Acer Aspire 5 WiFi Antenna Repair

WiFi Antenna Repair is one of the most common repairs for Acer Aspire 5. This repair involves replacing the damaged connectivity component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

🔧 Required Tools

What You'll Need

• Replacement connectivity part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Slide the locking switch into the unlocked position to ready the battery for removal.

Step 2:

Slide the release latch until the battery pops out.

Step 3:

Remove the battery now that it's been unsecured.

Step 4:

Flip over the device so the back is facing upward.

Step 5:

Remove the five 8.7mm Phillips #0 screws securing the back panel.

Step 6:

Use the black spudger to pry open the back panel.

Step 7:

The WiFi card should be directly above the hard drive. Detach the two coaxial connectors attached to the WiFi card by pulling on them.

Step 8:

Remove the two 3mm Phillips #0 screws securing the WiFi card.

Step 9:

Remove the WiFi card.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your Acer Aspire 5 instead of replacing it, you're preventing approximately 251 kg of CO₂ emissions. Manufacturing a new Acer Aspire 5 generates 255 kg of CO₂, while this repair only produces about 4 kg of CO₂. That's a 98% reduction in carbon emissions!