Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Logic
difficult

Acer Aspire 4 Logic Board Repair

Complete guide to Acer Aspire 4 logic board repair. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$300 - $800
⏱️ Time:3-6 hours
🌍 CO₂ Saved:235 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$180 - $480
Labor$120 - $320
Total Estimated Cost$300 - $800

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Logic Board Repair is one of the most common repairs for Acer Aspire 4. This repair involves replacing the damaged logic component with a new or refurbished part. The process typically takes 3-6 hours and requires difficult skill level.

🔧 Required Tools

What You'll Need

  • Replacement logic part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1

Turn over the laptop to view the underside.

Step 2:

Step 2 - Image 1

Use [product|IF145-020|tweezers] (or a similar tool) to slide the orange push pin. To release the battery, push it to the left.

Step 3:

Step 3 - Image 1

You can lift the battery up and out now.

Step 4:

Step 4 - Image 1

Remove the two 6.0 mm screws that secure the keyboard using a Phillips head screwdriver.

They can be easily identified by looking for the screws with the keyboard icon next to them.

Step 5:

Step 5 - Image 1
Step 5 - Image 2

Turn the laptop over and open it.

Use flat edged tools to gently separate the keyboard from the laptop. It should snap off with a small amount of force.

Be sure to push the small tabs along the top of the keyboard, while lifting to successfully free the keyboard.

Step 6:

Step 6 - Image 1

Gently lift away the keyboard, making sure not to damage the data cable or the connector.

The connection is located beneath the bottom center of the keyboard.

Step 7:

Step 7 - Image 1

Remove piece of tape that covers the connection between the data cable and the connector.

Step 8:

Step 8 - Image 1

Detach the data cable by flipping up the small black latch on the connector.

Once the latch is lifted, the keyboard should be completely free.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $180-$480)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($300-$800)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your Acer Aspire 4 instead of replacing it, you're preventing approximately 235 kg of CO₂ emissions. Manufacturing a new Acer Aspire 4 generates 255 kg of CO₂, while this repair only produces about 20 kg of CO₂. That's a 92% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your Acer Aspire 4 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides