2024 Hyundai Tucson Windshield Wiper Replacement
Complete guide to 2024 Hyundai Tucson windshield wiper replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Windshield Wiper Replacement is one of the most common repairs for 2024 Hyundai Tucson. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 10-15 min and requires easy skill level.
What You'll Need
- Replacement maintenance part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Ensure your vehicle is turned off.
Do not touch the new lightbulb with your hands. The oil on your hands can damage the bulb and cause it to fail prematurely.
Inside the driver’s side of the vehicle, pull the hood latch to unlock the hood.
Open the hood.
Secure the hood using the hood support rod.
Step 2:
Locate the low-beam headlight assembly.
The low-beam assembly is on the outermost side of the vehicle.
Step 3:
On the low-beam headlight assembly, unscrew the assembly cap.
Remove the assembly cap, and then set it aside.
Step 4:
Reach into the low-beam headlight assembly, and then grab the headlight housing.
Twist the headlight housing counterclockwise to unlock it.
Step 5:
Pull out the headlight housing from the headlight assembly.
Grab the lightbulb and then pull it out from the headlight housing.
Step 6:
Do not touch the new lightbulb with your hands. The oil on your hands can damage the bulb and cause it to fail prematurely.
Open the package of the new lightbulb.
Grab the lightbulb by the base.
Attach the new lightbulb to the headlight housing.
Step 7:
Place the headlight housing into the headlight assembly.
Twist the headlight housing clockwise to lock it.
Step 8:
Screw the assembly cap to the low-beam headlight assembly.
Step 9:
Turn on your vehicle.
Turn on your lights.
Move to the front of the vehicle, and then visually verify that the new low-beam lightbulb works.
If the new low-beam lightbulb does not work, turn off your vehicle, check the headlight housing connections, and then reverify.
Turn off your vehicle.
Step 10:
Disengage the hood support rod.
Close the hood.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $9-$24)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($15-$40)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2024 Hyundai Tucson instead of replacing it, you're preventing approximately 5699 kg of CO₂ emissions. Manufacturing a new 2024 Hyundai Tucson generates 5700 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2024 Hyundai Tucson and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.