Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Brakes
moderate

2022 Nissan Murano Brake Pad Replacement

Complete guide to 2022 Nissan Murano brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$150 - $300
⏱️ Time:1-2 hours
🌍 CO₂ Saved:5895 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$90 - $180
Labor$60 - $120
Total Estimated Cost$150 - $300

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Brake Pad Replacement is one of the most common repairs for 2022 Nissan Murano. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

  • Replacement brakes part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Pull the button on the back of the key fob from right to left while pulling the hoop on the top.

Completely remove the key from the fob.

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Point the fob vertically towards you and find the groove between the front and the back.

Carefully, using an iFixit opening tool or similar household object, pry open the fob by sliding the flat end into the groove.

Slide your opening tool around the entire fob following the groove.

Pull apart the two main pieces.

Step 3:

Step 3 - Image 1
Step 3 - Image 2

Carefully remove the individual pieces from the inside one at a time.

There are two pieces in total to remove.

Step 4:

Step 4 - Image 1
Step 4 - Image 2

Place the new battery into the key in the same orientation as the one that was removed.

You will notice on the battery that there are small letters. When placing the battery in the fob those letters need to face up.

Step 5:

Step 5 - Image 1
Step 5 - Image 2

Set the pieces back within the fob.

Gently line up the pieces and press them together to close it.

Step 6:

Step 6 - Image 1
Step 6 - Image 2

Add the physical key back into the fob.

Slide the key back into position and push down until you feel a small click. When you hear the small click you know the key is properly in.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Easy | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $90-$180)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($150-$300)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2022 Nissan Murano instead of replacing it, you're preventing approximately 5895 kg of CO₂ emissions. Manufacturing a new 2022 Nissan Murano generates 5900 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2022 Nissan Murano and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides