2020 Toyota Camry Spark Plug Replacement

Spark Plug Replacement is one of the most common repairs for 2020 Toyota Camry. This repair involves replacing the damaged engine component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

🔩 Replacement Parts

What You'll Need

• Replacement engine part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Open the glove box completely and remove any items inside so nothing falls out during the process.

Step 2:

Remove the cabin air filter cover from the back of the glove compartment.

Step 3:

Press the tabs on each side of the cabin air filter cover, and pull it straight off.

Step 4:

Slide the cabin air filter out.

Remove the old cabin air filter from the case.

Make sure to check the airflow direction arrows so you know how the new one should be installed.

Step 5:

Install the new filter with the airflow arrow pointing down into the case.

Slide the case back into the slot and close the cabin air filter door.

Step 6:

Reinstall the filter cover.

Lift the glove box back into position, reconnect the damper arm, and close it.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2020 Toyota Camry instead of replacing it, you're preventing approximately 5998 kg of CO₂ emissions. Manufacturing a new 2020 Toyota Camry generates 6000 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 100% reduction in carbon emissions!