2020 Kia Sorento Air Filter Replacement

Air Filter Replacement is one of the most common repairs for 2020 Kia Sorento. This repair involves replacing the damaged engine component with a new or refurbished part. The process typically takes 15-20 min and requires easy skill level.

What You'll Need

• Replacement engine part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

To unlock your hood, lift the interior release latch.

Open the car's hood and secure it with the hood strut (circled in red) for easy access.

Step 2:

Raise the lever (circled in red) to access the air cleaner filter and cover (circled in orange).

Step 3:

After opening the air cleaner, you should observe that the levers are positioned in the "LOCK" state, as depicted in the first image. Proceed to release the filter by turning the levers to the "UNLOCK" position.

Step 4:

Swap out the air cleaner filter for a fresh replacement, making sure to fully insert the filter into the air cleaner.

Step 5:

Before closing the filter cover, rotate the levers back to the "LOCK" position.

Step 6:

With the air filter successfully replaced, you can now release the hood strut and proceed to close your hood.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2020 Kia Sorento instead of replacing it, you're preventing approximately 5699 kg of CO₂ emissions. Manufacturing a new 2020 Kia Sorento generates 5700 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!