2020 Hyundai Santa Fe Battery Replacement (Car)
Complete guide to 2020 Hyundai Santa Fe battery replacement (car). Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Battery Replacement (Car) is one of the most common repairs for 2020 Hyundai Santa Fe. This repair involves replacing the damaged electrical component with a new or refurbished part. The process typically takes 30 min and requires easy skill level.
What You'll Need
- Replacement electrical part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Pull the latch on the left side of the glovebox to open.
Step 2:
Using your fingers, pull on the latch on the right side of the glove box to detach it.
Step 3:
Use two fingers to turn the stopper on the inside right of the glove box counterclockwise.
The stopper should pop right out.
Step 4:
Release the stopper on the inner left side of the glove box.
Step 5:
Lower the glovebox down to reveal the cabin air filter compartment.
Step 6:
Press down on the latches below the arrows on both sides of the compartment door to open it.
Pull out the air filter.
Note which way the arrows on the filter are pointing.
Step 7:
Check which way the arrows should point when placing the new filter.
They typically point down with the direction of the airflow, but may point up depending on the filter and your car.
Step 8:
Slide the air filter back into the compartment.
Shut the glove compartment door.
You have now changed the air filter!
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $60-$120)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($100-$200)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2020 Hyundai Santa Fe instead of replacing it, you're preventing approximately 5685 kg of CO₂ emissions. Manufacturing a new 2020 Hyundai Santa Fe generates 5700 kg of CO₂, while this repair only produces about 15 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2020 Hyundai Santa Fe and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.