2020 Honda Fit Brake Pad Replacement
Complete guide to 2020 Honda Fit brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Brake Pad Replacement is one of the most common repairs for 2020 Honda Fit. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement brakes part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Open your trunk to access the brake light panel.
Step 2:
Use a trim removal tool or your key to pry the panel and gain access to the brake light.
Step 3:
Rotate the brake light socket clockwise until it unlocks.
Pull out the brake light socket.
Make sure you are replacing the bottom bulb(brake light) and not the top bulb(tail light).
Step 4:
Pull out the old bulb from brake light socket and insert new bulb.
The old bulb can be identified with its dark burnt look.
Wear a nitrile glove or something similar to avoid getting oils from your fingers on the glass bulb. The oils and salt on your hands can reduce the life of the bulb and cause it to burn out more quickly.
Step 5:
Insert brake light socket with the new bulb into the housing compartment.
Similar to the removal, you have to rotate the socket into a locked position.
Step 6:
After reassembly, have someone test the brake light so you can see if it works or not.
If no one is available to help, reverse towards a wall and park. Press on the brake and look at your side mirrors to check if they light up.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $90-$180)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($150-$300)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2020 Honda Fit instead of replacing it, you're preventing approximately 5795 kg of CO₂ emissions. Manufacturing a new 2020 Honda Fit generates 5800 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2020 Honda Fit and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.