Skip to main content
🔧
HowMuchToFixAI for a Greener Future
Lighting
easy

2020 Chevrolet Camaro Headlight Bulb Replacement

Complete guide to 2020 Chevrolet Camaro headlight bulb replacement. Cost estimates, difficulty level, time required, and environmental impact.

💰 Cost:$20 - $100
⏱️ Time:15-30 min
🌍 CO₂ Saved:6099 kg

🌍 Share Your Environmental Impact

Inspire others to repair instead of replace! Share how much CO₂ you're saving.

Share your impact:

💰 Cost Breakdown

Parts$12 - $60
Labor$8 - $40
Total Estimated Cost$20 - $100

💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.

🔧 Repair Overview

Headlight Bulb Replacement is one of the most common repairs for 2020 Chevrolet Camaro. This repair involves replacing the damaged lighting component with a new or refurbished part. The process typically takes 15-30 min and requires easy skill level.

🔧 Required Tools

What You'll Need

  • Replacement lighting part (OEM or aftermarket)
  • Precision screwdriver set (Phillips #000 or pentalobe)
  • Opening tools (plastic spudger, suction cup)
  • Adhesive strips or glue
  • Clean workspace with good lighting

Step-by-Step Process

Step 1:

Step 1 - Image 1
Step 1 - Image 2

Using either the button on your vehicle's key fob, or the button on the driver's side door, open the trunk.

​ Go to the rear of the vehicle and lift the rear trunk lid until it reaches its highest position and locks out.​

Step 2:

Step 2 - Image 1
Step 2 - Image 2

Using a spudger, gently pry the covers for the pop-rivets out.

Remove the pop-rivets themselves by inserting a spudger underneath them and prying up.​

There will be a gap for the head of the spudger on each pop-rivet.

Step 3:

Step 3 - Image 1

After the fastener caps have been removed, twist the knob on top of the cover counterclockwise to remove it.

Step 4:

Step 4 - Image 1

With the housing assembly open, gently lift the housing cover from the taillight assembly and set it aside.​ ​

Step 5:

Step 5 - Image 1
Step 5 - Image 2

Locate the reverse bulb socket; it will be identifiable by a wire running from the back of the tail light.

Gently grab the reverse bulb socket with your pliers, then gently turn it counterclockwise for one-quarter of a rotation.

Step 6:

Step 6 - Image 1

Pull the socket out from the assembly, and pull out the old bulb.

Insert your new bulb by gently pressing it into the socket.

Handle the bulbs very carefully, using a glove so that grease from your hands does not get onto the glass, thus reducing their useful life. Glass can break very easily and cause accidents.

📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.

iFixit Difficulty: Moderate | Time: NaNh NaNm

DIY vs Professional Repair

✋ DIY Repair

  • ✅ Lower cost (parts only: $12-$60)
  • ✅ Learn new skills
  • ❌ Risk of further damage
  • ❌ No warranty
  • ❌ Requires tools and time

🔧 Professional Repair

  • ✅ Expert installation
  • ✅ Warranty included
  • ✅ Faster turnaround
  • ❌ Higher cost ($20-$100)
  • ❌ Need to find reputable shop

Environmental Impact

By choosing to repair your 2020 Chevrolet Camaro instead of replacing it, you're preventing approximately 6099 kg of CO₂ emissions. Manufacturing a new 2020 Chevrolet Camaro generates 6100 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!

Get a Personalized Repair Estimate

Upload a photo of your 2020 Chevrolet Camaro and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.

Related Repair Guides