2019 Toyota Matrix Headlight Bulb Replacement
Complete guide to 2019 Toyota Matrix headlight bulb replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Headlight Bulb Replacement is one of the most common repairs for 2019 Toyota Matrix. This repair involves replacing the damaged lighting component with a new or refurbished part. The process typically takes 15-30 min and requires easy skill level.
What You'll Need
- Replacement lighting part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Open the trunk.
The brake light is located at the upper center of the inside of the trunk window.
Step 2:
Use a Phillips screwdriver to remove two screws from the brake light mount.
Use a flathead screwdriver to pry the brake light mount on both sides and push out the black plastic fasteners.
To prevent the brake light mount from falling, hold it in place while pushing out the plastic fasteners.
Step 3:
Hold the brake mount in place, carefully press down on the brake light cable connector, and remove it from the socket.
Step 4:
Unclip the red light cover from the mounting points on both the front-left and front-right sides.
Gently wiggle and pull out the light bulb from its location.
Step 5:
Insert the new light bulb, then carefully press down to secure the light bulb.
Insert the center clip of the red cover into the slot on the brake light mount.
Clip the lens front-side left and right clipping position into the mount's designated clipping locations.
Step 6:
Reconnect the brake light mount to the cable attachment.
Push the mount's black plastic fasteners into the highlighted holes.
Use moderate force to push in the plastic fasteners
Replace the two Phillips screws into the brake light mount.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $12-$60)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($20-$100)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2019 Toyota Matrix instead of replacing it, you're preventing approximately 5999 kg of CO₂ emissions. Manufacturing a new 2019 Toyota Matrix generates 6000 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2019 Toyota Matrix and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.