2019 Ford F-150 Oil Change
Complete guide to 2019 Ford F-150 oil change. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Oil Change is one of the most common repairs for 2019 Ford F-150. This repair involves replacing the damaged maintenance component with a new or refurbished part. The process typically takes 30-45 min and requires easy skill level.
What You'll Need
- Replacement maintenance part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1: Open Hood
Open Hood: Open the hood using the hood latch inside the driver side of the car.
The hood will open slightly, reach under the front center of the hood to find the release latch.
Push the release latch to the right to open the hood.
Step 2: Disconnect Car Battery
Disconnect Battery: Use an adjustable wrench to disconnect the negative power from the battery (Turn bolt counter-clockwise, then lift).
8 mm socket wrench
WARNING: Be careful when disconnecting battery terminals. Ensure vehicle connections are positioned to avoid contact with the battery terminals to prevent electric shock.
Step 3: Remove Mirror Glass
Tilt Mirror Forward and Disconnect Mirror: Locate lock tabs behind the mirror. Apply pressure to all three tabs until the mirror unlatches and you can remove it.
Step 4: Unscrew Backing
Unscrew Backing: Locate and unscrew 4 Torx T20 bolts holding backing and disconnect it from the mirror.
Step 5: Pull backing off
Remove backing.
Be careful not to pull on electric wires to avoid damaging internal components of the mirror.
Step 6: Disconnect Old Blinker Light
Remove old mirror blinker light from the mirror frame.
Disconnect the plug from the rear of the blinker light.
Step 7: Install New Mirror Blinker Light
Install New Mirror Blinker Light: Slide new light into the mirror and press firmly until you hear a click.
Step 8: Connecting Wires to New Blinker Light
Connect new blinker light by plugging wire into the back of the blinker light.
Step 9: Reconnect Battery and Testing
Reconnect Battery: Reconnect the negative power to the battery to restore power to the truck.
Test Blinker: Test your blinker to ensure the new setup works and reassemble your mirror.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $21-$45)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($35-$75)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2019 Ford F-150 instead of replacing it, you're preventing approximately 6198 kg of CO₂ emissions. Manufacturing a new 2019 Ford F-150 generates 6200 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2019 Ford F-150 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.