2019 BMW X5 Spark Plug Replacement
Complete guide to 2019 BMW X5 spark plug replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Spark Plug Replacement is one of the most common repairs for 2019 BMW X5. This repair involves replacing the damaged engine component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement engine part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Pop and lift the hood by pulling the release lever below the driver's seat.
The plastic filter cover is located on the upper left corner of the engine bay.
Step 2:
There are four plastic screws on the air filter cover.
Twist each of the plastic screws with the half inch screw driver a quarter turn counter-clockwise。
Mind the plastic hood support while removing the plastic cover toward the right hand side.
Step 3:
Once plastic cover has been removed, cabin air filter cover will be exposed.
There are three 1/2" plastic bolts.
Unscrew each plastic bolt by turning a quarter turn counter clockwise.
Step 4:
Remove the electronic plastic connector before removing air filter cover.
Remove the air filter cover from the vehicle.
Step 5:
Once the filter cover has been removed two air cabin filters will be exposed.
Locate the plastic clips on each end of the filter holder
Depress the clips using your thumbs to remove the air filter.
Step 6:
Pay attention to Air Flow indicator arrows when reinstalling the filters.
Clip the filters back into place one side at a time.
Repeat the process for the second filter.
Step 7:
Reinstall the filter cover.
Re-connect the plastic electronic plug.
Step 8:
Re-install the plastic cover.
Mind the hydraulic lift for the hood while re-installing plastic cover.
Clean dust off the cover for good measure.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Moderate | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $60-$120)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($100-$200)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2019 BMW X5 instead of replacing it, you're preventing approximately 6498 kg of CO₂ emissions. Manufacturing a new 2019 BMW X5 generates 6500 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2019 BMW X5 and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.