2018 Nissan Versa Brake Pad Replacement
Complete guide to 2018 Nissan Versa brake pad replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Brake Pad Replacement is one of the most common repairs for 2018 Nissan Versa. This repair involves replacing the damaged brakes component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement brakes part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Pull the hood lever.
Step 2:
Push the lever underneath the hood to the left.
The lever is located in the center underneath the hood.
Step 3:
Pull up the hood.
Step 4:
Insert the support rod into the slot.
The stent is located to the right of the hood.
The slot is located in the underside of the hood to the right.
Step 5:
Pull out the connector from the bulb.
Depending on the make of your vehicle, you may have push the tab on the connector that reads "push" before pulling out the connector.
Step 6:
Twist the plastic ring out from the bulb.
Step 7:
Pull out the old bulb.
High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped.
When handling the bulb, do not touch the glass envelope.
Step 8:
Insert the replacement bulb.
High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped.
When handling the bulb, do not touch the glass envelope.
Step 9:
Twist the plastic ring back onto the bulb.
Step 10:
Insert the connector into the bulb.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $90-$180)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($150-$300)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2018 Nissan Versa instead of replacing it, you're preventing approximately 5895 kg of CO₂ emissions. Manufacturing a new 2018 Nissan Versa generates 5900 kg of CO₂, while this repair only produces about 5 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2018 Nissan Versa and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.