2018 Hyundai Kona Spark Plug Replacement
Complete guide to 2018 Hyundai Kona spark plug replacement. Cost estimates, difficulty level, time required, and environmental impact.
🌍 Share Your Environmental Impact
Inspire others to repair instead of replace! Share how much CO₂ you're saving.
💰 Cost Breakdown
💡 Tip: Costs vary by location and repair shop. Authorized service centers typically charge more than independent repair shops.
🔧 Repair Overview
Spark Plug Replacement is one of the most common repairs for 2018 Hyundai Kona. This repair involves replacing the damaged engine component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.
What You'll Need
- Replacement engine part (OEM or aftermarket)
- Precision screwdriver set (Phillips #000 or pentalobe)
- Opening tools (plastic spudger, suction cup)
- Adhesive strips or glue
- Clean workspace with good lighting
Step-by-Step Process
Step 1:
Press the button or slide the groove to release the emergency key.
Step 2:
After removing the key blade, locate the slot or indentation.
Insert a flathead into the slot and gently twist to open the key fob.
Step 3:
Carefully lift the cover to reveal the internal components.
Step 4:
Use a non-metallic tool or your hand to gently pry out the old battery.
Dispose of the old battery following local regulations.
Step 5:
Place the new battery into the designated slot with the correct polarity.
Ensure the battery is securely in place.
Step 6:
Align the cover with the key fob and press down to snap it into place.
Ensure the key fob is securely closed.
Slide the key blade back into its slot until it clicks into place.
Step 7:
Press any button on the key fob to verify that the new battery is functioning.
If the light blinks on the front of the fob key, the battery replacement is successful.
📖 Repair guide provided by iFixit - The free repair manual. Licensed under CC BY-NC-SA 3.0.
iFixit Difficulty: Easy | Time: NaNh NaNm
DIY vs Professional Repair
✋ DIY Repair
- ✅ Lower cost (parts only: $60-$120)
- ✅ Learn new skills
- ❌ Risk of further damage
- ❌ No warranty
- ❌ Requires tools and time
🔧 Professional Repair
- ✅ Expert installation
- ✅ Warranty included
- ✅ Faster turnaround
- ❌ Higher cost ($100-$200)
- ❌ Need to find reputable shop
Environmental Impact
By choosing to repair your 2018 Hyundai Kona instead of replacing it, you're preventing approximately 5698 kg of CO₂ emissions. Manufacturing a new 2018 Hyundai Kona generates 5700 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 100% reduction in carbon emissions!
Get a Personalized Repair Estimate
Upload a photo of your 2018 Hyundai Kona and get an AI-powered cost estimate in seconds. See exactly what's damaged and how much it'll cost to fix.