2018 Audi Q5 Tire Rotation

Tire Rotation is one of the most common repairs for 2018 Audi Q5. This repair involves replacing the damaged tires component with a new or refurbished part. The process typically takes 30-45 min and requires easy skill level.

🔧 Required Tools

🔩 Replacement Parts

What You'll Need

• Replacement tires part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Place a towel beneath the glovebox on the passenger side of the vehicle.

Step 2:

Remove the three plastic screws securing the foam panel underneath the glovebox using your hands.

Step 3:

Remove the foam panel, and take note of its orientation.

Step 4:

Remove the white filter housing door by sliding it to the right using the built-in handle.

Excessive force may be needed.

Step 5:

Remove the old filter and clean out any potential debris inside or around the housing.

Step 6:

Slide the new cabin air filter into the housing with the slant positioned in the upper right corner.

Step 7:

Place the filter housing door back on the slot and slide it to the left until it's properly secured.

Step 8:

Reattach the foam panel in the correct orientation.

Ensure the screw holes line up with the screw mounts.

Step 9:

Secure and fasten the three plastic screws.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2018 Audi Q5 instead of replacing it, you're preventing approximately 6399 kg of CO₂ emissions. Manufacturing a new 2018 Audi Q5 generates 6400 kg of CO₂, while this repair only produces about 1 kg of CO₂. That's a 100% reduction in carbon emissions!