2017 Honda Civic Spark Plug Replacement

Spark Plug Replacement is one of the most common repairs for 2017 Honda Civic. This repair involves replacing the damaged engine component with a new or refurbished part. The process typically takes 1-2 hours and requires moderate skill level.

🔧 Required Tools

What You'll Need

• Replacement engine part (OEM or aftermarket)
• Precision screwdriver set (Phillips #000 or pentalobe)
• Opening tools (plastic spudger, suction cup)
• Adhesive strips or glue
• Clean workspace with good lighting

Step-by-Step Process

Step 1:

Turn your vehicle off before beginning.

Open your trunk.

Use a Phillips #2 screwdriver to remove the two screws securing the shield.

Step 2:

To remove the brake light housing, start from the top of the frame and pull the shield outwards.

Step 3:

Twist the brake light socket counterclockwise and pull it directly out, with care not to damage the wires.

The brake light has a gray plug.

Step 4:

Grip light bulb and slide it directly out of its socket.

Step 5:

Install a new bulb by pressing it into the socket.

You'll hear a "click" when it's properly inserted.

Step 6:

Place the socket back in its housing and twist it clockwise.

Step 7:

Align the brake light shield with the two sockets and firmly press the brake light inward.

You'll hear a "pop" when the shield is secured.

DIY vs Professional Repair

Environmental Impact

By choosing to repair your 2017 Honda Civic instead of replacing it, you're preventing approximately 5798 kg of CO₂ emissions. Manufacturing a new 2017 Honda Civic generates 5800 kg of CO₂, while this repair only produces about 2 kg of CO₂. That's a 100% reduction in carbon emissions!